> Publications > International Journal


Lee. S.H, Song. H. W, Kang. B.S, Kwak. M. K.: Remora-Inspired Reversible Adhesive For Underwater Applications. ACS applied materials & interfaces 2019, 11 (50), 47571-47576


Lee. S.H, Hwang. I. S., Kang B. S, Jeong. H. E, Kwak. M. K.: Highly Flexible and Self-Adaptive Dry Adhesive End-Effectors for Precision Robotics. Soft matter 2019, 15 (29), 5827-5834. [Inside back cover]


Park, J. B., Lee, K. H., Han, S. H., Chung, T. H., Kwak, M. K., Rho, H. K, Ha, J. S.: Stable and efficient transfer-printing including repair using a GaN-based microscale light-emitting diode array for deformable displays. Scientific reports 2019, 9(1), 1-7.


S. A. Memon, M. Sajid, M. Malik, A. Alquaity, M. Rehman, T. A. Cheema, M. K. Kwak, C. W. Park :Investigation of the Thermal Performance of Salt Hydrate Phase Change of Nanoparticle Slurry Flow in a Microchannel, Journal of Chemistry, 2019.


Park J, Choi W, Chung T, Lee S.H, Kwak M. K, Ha J, Jeong T: Transfer printing of vertical-type microscale light-emitting diode array onto flexible substrate using biomimetic stamp. Optics express 2019, 27(5):6832-6841.


Chen X, Lee S.H, Zhang C, Li Q, Yamada K, Kwak MK, Guo LJ: Plasmonic roller lithography. Nanotechnology 2019, 30(10):105202.
64 Lee S.H, Park CW, Kwak MK: Continuous Fabrication of Wide-Tip Microstructures for Bio-Inspired Dry Adhesives via Tip Inking Process. Journal of Chemistry 2019.
63 Lee S.H., Yi H, Park C, Jeong H, Kwak M.K.: Continuous tip widening technique for roll-to-roll fabrication of dry adhesives. Coatings 2018, 8(10):349.
62 Yi H, Lee S.H, Seong M, Kwak M. K, Jeong HE: Bioinspired reversible hydrogel adhesives for wet and underwater surfaces. Journal of Materials Chemistry B 2018, 6(48):8064-8070.
61 Kim D-H, Ewald AJ, Park J, Kwak M.K., Gray RS, Su C-Y, Seo J, An SS, Levchenko A: Biomechanical interplay between anisotropic re-organization of cells and the surrounding matrix underlies transition to invasive cancer spread. Scientific reports 2018, 8(1):14210.
60 Lee, S.-H., Seong, M., Kwak, M. K., Ko, H., Kang, M., Park, H. W., Kang, S. M., Jeong, H. E., Tunable Multimodal Drop Bouncing Dynamics and Anti-Icing Performance of a Magnetically Responsive Hair Array. ACS Nano 2018, DOI: 10.1021/acsnano.8b05109
59 Hwang, I., Kim, H. N., Seong, M., Lee, S.-H., Kang, M., Yi, H., Bae, W. G., Kwak, M. K., Jeong, H. E., Multifunctional Smart Skin Adhesive Patches for Advanced Health Care., Advanced Healthcare Materials 2018, 7(15), 1800275.
58 Wi, J-S., Oh, D. K., Kwak, M. K., Ok, J. G., Size-dependent detection sensitivity of spherical particles sitting on a double-bent gold strip array, Optical Materials Express 2018, 8(7), 1774-1779.
57 Lee, S. H.; Kim, S. W.; Kang, B. S.; Chang, P.-S.; Kwak, M. K., Scalable and continuous fabrication of bio-inspired dry adhesives with a thermosetting polymer. Soft matter 2018, 14, 2586-2593. [Front cover]
56 Park, J.; Holmes, W. R.; Lee, S. H.; Kim, H.-N.; Kim, D.-H.; Kwak, M. K.; Wang, C. J.; Edelstein-Keshet, L.; Levchenko, A., Mechanochemical feedback underlies coexistence of qualitatively distinct cell polarity patterns within diverse cell populations. Proceedings of the National Academy of Sciences 2017, 114 (28), E5750-E5759.
55 Lee, S. H.; Kim, S. W.; Park, C. W.; Jeong, H. E.; Ok, J. G.; Kwak, M. K., Scalable fabrication of flexible transparent heaters comprising continuously created metallic micromesh patterns incorporated with biomimetic anti-reflection layers. International Journal of Precision Engineering and Manufacturing-Green Technology 2017, 4 (2), 177-181.
54 Kwak, R.; Park, H.-H.; Ko, H.; Seong, M.; Kwak, M. K.; Jeong, H. E., Partially cured photopolymer with gradient bingham plastic behaviors as a versatile deformable material. ACS Macro Letters 2017, 6 (5), 561-565.
53 Kang, O. H.; Lee, S. H.; Yun, J. H.; Yi, H.; Kwak, M. K.; Lee, S. R., Adhesion tunable bio-inspired dry adhesives by twisting. International Journal of Precision Engineering and Manufacturing 2017, 18 (10), 1433-1437.
52 J. H. Lee, J. Y. Kim, J. H. Choi, J. G. Ok, M. K. Kwak, "Scalable fabrication of flexible microstencils by using sequentially induced dewetting phenomena", ACS OMEGA, 2017, 2(3), 1097-1103.
51 J. S. Wi, S. Lee, S. H. Lee, D. K. Oh, K. T. Lee, I. Park, M. K. Kwak, J. G. Ok, "Facile three-dimensional nanoarchitecturing of double-bent gold strips on roll-to-roll nanoimprinted transparent nanogratings for flexible and scalable plasmonic sensors", Nanoscale, 9, 1398-1402 (2017.01)
50 Ali, H.; Kim, K. W.; Kwak, M. K.; Kim, J. S.; Choi, J. Y.; Park, C. W., Numerical investigation on the flow mixing feature inside a continuously carbonating process tank. Computers & Electrical Engineering 2016, 51, 343-355.
49 S. H. Lee, J. H. Lee, C. W. Park, M. K. Kwak, "Roll-type photolithography for continuous fabrication of narrow bus wires", Journal of Micromechanics and Microengineering, 26(11), 115008 (2016.10)
48 K. W. Kim, W. H. Lee, Y. H. Lee, H. Ali, M. K. Kwak, C. W. Park, "Particle Image velocimetry measurement of hydrodynamic properties of raceway pond with the effect of central wall", Sensors and Materials, 28(9), 957-966 (2016.09)
47 H. Yi, M. Kang, M. K. Kwak, H. E. Jeong, "Simple and Reliable Fabrication of Bioinspired Mushroom-Shaped Micropillars with Precisely Controlled Tip Geometries", ACS Applied Materials & Interfaces, 8(34), 22671-22678 (2016.08)
46 S. Koo, S. H. Lee, J. D. Kim, J. G. Hong, H. W. Baac, M. K. Kwak, J. G. Ok, "Controlled airbrush coating of polymer resists in Roll-to-Roll nanoimprinting with regimented residual layer thickness", International Journal of Precision Engineering and Manufacturing, 17(7), 943-947 (2016.07)
45 J. Park, D.-H. Kim, H.-N. Kim, C. J. Wang,M. K. Kwak, E. Hur, K.-Y. Suh, S. S. An, A. Levchenko, "Directed migration of cancer cells guided by the graded texture of the underlying matrix", Nature Materials, doi:10.1038/nmat4586 (2016.03)
44 Kim, J. H.; Kang, S. M.; Lee, B. J.; Ko, H.; Bae, W.-G.; Suh, K. Y.; Kwak, M. K.; Jeong, H. E., Remote manipulation of droplets on a flexible magnetically responsive film. Scientific reports 2015, 5, 17843.
43 Heo, G. S.; Lee, S.-R.; Kwak, M. K.; Park, C. W.; Kim, G.; Lee, C.-Y., Motion control of bicycle-riding exoskeleton robot with interactive force analysis. International Journal of Precision Engineering and Manufacturing 2015, 16 (7), 1631-163
42 H. S. Jung, K. M. Park, D. H. Kang, M. K. Kwak, S. Lim, P. S. Chang and K. Kim, “Gas-sensing array application for on-line monitoring in a heat-responsive bioprocess of Streptomyces griseus HUT 6037”, Food science and biotechnology, 24(3), 875-881 (2015. 06)
41 W. H. Lee, K. W. Kim, J. H. Lee, J. H. Yoon, M. K. Kwak and C. W. Park, “Visualized Flow Structure inside an Odor-Removing Basin System with Multi-Stacked Porous Baffles” Applied Mechanics and Materials, 752(753), 908-912 (2015. 04)
40 M. K. Kwak, C. W. Park, K. I. Hwang, C. M. Park, H. E. Jeong and J. H. Choi, “Extreme hydrophobicity and omniphilicity of high-aspect-ratio silicon structures”, Modern Physics Letters B, 29(06n07), 1540009 (2015. 03)
39 M. K. Kwak, J. G. Ok, S. H. Lee and L. J. Guo, “Visually Tolerable Tiling (VTT) for making large-area flexible patterned surface”, Materials Horizons, 2, 86 (2014. 09)
38 H. Yi, I. Hwang, J. H. Lee, D. Lee, H. Lim, D. Tahk, M. Sung, W. G. Bae, S. J. Choi, M. K. Kwak and H. E. Jeong, “Continuous and Scalable Fabrication of Bioinspired Dry Adhesives via a Roll-to-Roll Process with Modulated Ultraviolet-Curable Resin”, ACS Applied Materials & Interfaces, 6(16) (2014. 08)
37 A. Ni, T. A. Cheema, M. K. Kwak and C. W. Park, “Two-dimensional numerical simulation of the red blood cell floating in a plasma-alcohol solution through stenosis in a microvessel”, Korea-Australia rheology journal, 26(3), 293-301 (2014. 08)
36 Y. H. Lee, W. H. Lee, K. W. Kim, H. Ali, T. A. Cheema, M. K. Kwak and C. W. Park, “Numerical investigation of stress–strain and deformation characteristics imposed upon automatic screener rakes” Material Research Innovations, 18(S5), S17-S20 (2014. 08)
35 T. A. Cheema, C. Y. Lee, G. M. Kim, J. G. Hong, M. K. Kwak and C. W. Park, “Numerical Investigation on the Effects of the Positional Variation of Porosity in Thin Porous Layers”, International Journal of Precision Engineering and Manufacturing, 15(7), 1405-1410 (2014. 07)
34 T. A. Cheema, K. W. Kim, M. K. Kwak, C. Y. Lee, G. M. Kim and C. W. Park, “Numerical investigation on composite porous layers in electroosmotic flow”, International Journal of Precision Engineering and Manufacturing-Green Technology, 1(3), 207-213 (2014. 06)
33 S. H. Lee, J. H. Lee, C. W. Park, C. Y. Lee, K. Kim, D. Tahk and M. K. Kwak, “Continuous fabrication of bio-inspired water collecting surface via roll-type photolithography”, International Journal of Precision Engineering and Manufacturing-Green Technology, 1(2), 119-124 (2014. 04)
32 T. A. Cheema, G. M. Kim, C. Y. Lee, J. G. Hong, M. K. Kwak and C. W. Park, “Characteristics of blood vessel wall deformation with porous wall conditions in an aortic arch”, Applied Rheology, 24(2), 24590 (2014. 01)
31 M. K. Kwak and L. J. Guo, “Phase-shift lithography”, Encyclopedia of Microfluidics and Nanofluidics, 1-10 (2014. 01)
30 J. H. Lee, J. H. Choi, S. R. Lee, C. Y. Lee, C. W. Park, G. M. Kim, M. K. Kwak, "Vacuum-Free Continuous Fabrication for Forming Narrow Bus Wires", Appl. Mech. Mater., 481, 158 (2014. 00)
29 E.H. Ahn, Y. Kim, Kshitiz, S.S. An, J. Afzal, S. Lee, M.K.Kwak, K.-Y.Suh, D.-H.Kim, and A.Levchenko, "Spatial control of adult stem cell fate using nanotopographic cues" Biomaterials, 35(8), 2401-2410 (2014. 03)
28 J. G. Ok, M. K. Kwak, C. M. Huard, H. S. Youn and L. J. Guo, "Photo Roll Lithography (PRL) for continuous and scalable patterning with application in flexible electronics", Adv. Mater. 25(45), 6554-6561 (2013, 12)
27 J. G. Ok, S. H. Ahn, M. K. Kwak and L. J. Guo, "Continuous and high-throughput nanopatterning methodologies based on mechanical deformation" J. Mater. Chem. C, 1(46), .7681-7691 (2013. 12)
26 S. M. Kang, C. Lee, H. N. Kim, B. J. Lee, J. E. Lee, M. K. Kwak and K. Y. Suh, "Directional Oil Sliding Surfaces with Hierarchical Anisotropic Groove Microstructures," Adv. Mater. 25(40), 5756-5761 (2013.10)
25 S. H. Ahn, J. G. Ok, M. K. Kwak, K.-T. Lee, J. Y. Lee, and L. J. Guo, "Template-free Vibrational Indentation Patterning (VIP) of micro/nano-scale grating structures with real-time pitch and angle tunability", Adv. Funct. Mater., 23(37), 4739-4744 (2013.10)
24 Y. H. Lee, K. W. Kim, A. Kvon, M. K. Kwak, C. Y. Lee, G. M. Kim, C. W. Park, "Experimental Investigation of Bubbly Flow Mixing inside a Washer Basin with an Immersed Coiled Heater", Appl. Mech. Mater. 372, 387 (2013.08)
23 G. S. Heo, S. R. Lee, C. W. Park, M. K. Kwak and C. Y. Lee, "Monitoring of Human Driver Behavior by Vehicle Trajectory Reconstruction for Transportation Safety Management" , Appl. Mech. Mater. 300, 589 (2013.02)
22 T. A. Cheema, H. Ali, K. W. Kim, C. Y. Lee, M. K. Kwak and C. W. Park, "Numerical Investigation on the effects of sample wire motion in a tube furnace", Appl. Mech. Mater. 300, 771 (2013.02)
21 W.-G. Bae, M. K. Kwak, H. E. Jeong, C. Pang, H. Jeong and K.-Y. Suh, “Fabrication and analysis of enforced dry adhesives with core-shell micropillars,” Soft Matter 9(5), 1422-1427 (2013.02).
20 W. G. Bae, D. Kim, M. K. Kwak, L. Ha, S. M. Kang and K. Y. Suh, “Enhanced skin adhesive patch with modulus-tunable composite micropillars,” Adv. Healthcare Mater. 2(1), 109-113 (2013.01). [Front Cover]
19 J. G. Ok, H. S. Youn, M. K. Kwak, K.-T. Lee, Y. J. Shin, A. Greenwald, Y. Liu, and L. J. Guo, "Continuous and scalable fabrication of flexible metamaterial films via Roll-to-Roll nanoimprint process for broadband plasmonic IR filters," Appl. Phys. Lett. 101, 223102 (2012. 12)
18 C. Pang, M. K. Kwak, C. Lee, H. E. Jeong, W.-G. Bae and K.-Y. Suh, “Nano meets beetles from wing to tiptoe: versatile tools for smart and reversible adhesions,” Nano today 7(6), 496-513 (2012.12). [Invited Review Article]
17 M. K. Kwak, J. G. Ok, J. Y. Lee and L. J. Guo, "Continuous phase-shift lithography with a roll-type mask and application to transparent conductor fabrication", Nanotechnology, 23, 344008 (2012.08).
16 S. M. Kang, S. M. Kim, H. N. Kim, M. K. Kwak, D. H. Tahk and K. Y. Suh, "Robust superomniphobic surfaces with mushroom-like micropillar arrays," Soft Matter, 8(33), 8563-8568, (2012.07).
15 H. Yoon, M. K. Kwak, S. M. Kim, S. H. Sung, J. Lim, H. S. Suh, K. Y. Suh, and K. Char, "Polymeric Nanopillars Reinforced with Metallic Shells in the Lower Stem Region" Small 7, 3005 (2011.11).
14 M. K. Kwak, C. Pang, H.-E. Jeong, H.-N. Kim, H. Yoon, H.-S. Jung, and K. Y. Suh, "Towards the Next Level of Bio-inspired Dry Adhesives: New Designs and Applications" Adv. Fuct. Mater. 21, 3606 (2011.10) [Invited Feature Article]
13 J. G. Ok, H. J. Park, M. K. Kwak, C. A. Pina-Hernandez, S. H. Ahn, and L. J. Guo, "Continuous patterning of nanogratings by nanochannel-guided lithography on liquid resists" Adv. Mater. 23, 4444 (2011.10).
12 M. K. Kwak, H.-E. Jeong, and K. Y. Suh, "'Dry Adhesive Medical Skin Patch: Rational Design and Enhanced Biocompatibility" Adv. Mater. 23, 3949 (2011.09). [Press released] [Highlighted in Nature “Materials science: Dry solution to a sticky problem”]
11 M. K. Kwak, Y.-W. Lim, "Multi-Functional Nanoscale Optical Films Fabricated Using a Nano-Imprinting Lithography Technique" J. Colloid Interface Sci. 367, 460 (2011.09).
10 M. K. Kwak, H. E. Jeong, Won Gyu Bae, Ho-Sup Jung, and K. Y. Suh, "Anisotropic adhesion properties of triangular tip-shaped micropillars" Small 7, 2266 (2011. 08). [Inside Cover]
9 M.-H. You, M. K. Kwak, D.-H. Kim, K. Kim, A. Levchenko, D.-Y. Kim, and K. Y. Suh, "Synergistically enhanced osteogenic differentiation of human mesenchymal stem cells by culture on nanostructured surfaces with induction media," Biomacromolecules 11, 1856 (2010.07).
8 M. K. Kwak, H. E. Jeong, T.-i. Kim, H. Yoon, and K. Y. Suh, "Bio-inspired slanted polymer nanohairs for anisotropic wetting and directional dry adhesion," Soft Matter 6, 1849 (2010.05). [Invited Highlight Article] [The ten most downloaded paper for April and May]
7 H. E. Jeong, M. K. Kwak, and K. Y. Suh, "Stretchable, Adhesion-Tunable Dry Adhesive by Surface Wrinkling," Langmuir 26, 2223 (2010.02).
6 H. E. Jeong, J.-K. Lee, M. K. Kwak, S. H. Moon, and K. Y. Suh, "Effect of leaning angle of gecko-inspired slanted polymer nanohairs on dry adhesion," Appl. Phys. Lett. 96, 043704 (2010.01).
5 M. K. Kwak, K. H. Shin, E. Y. Yoon and K. Y. Suh, "Fabrication of conductive metal lines by plate-to-roll pattern transfer utilizing edge dewetting and flexographic printing," J. Colloid Interface Sci. 343, 301 (2010.01).
4 H. E. Jeong, M. K. Kwak, C. I. Park and K. Y. Suh, "Wettability of nanoengineered dual-roughness surfaces fabricated by UV-assisted capillary force lithography," J. Colloid Interface Sci. 339, 202 (2009.11).
3 M. K. Kwak, T.-i. Kim, P. Kim, H. H. Lee, and K. Y. Suh, "Large-area dual-scale metal transfer by adhesive force," Small 5, 928 (2009.04).
2 T. A. Pham, P. Kim, M. K. Kwak, K. Y. Suh, and D. P. Kim, "Inorganic polymer photoresist for direct ceramic patterning by photolithography," Chem. Commun. 39, 4021 (2007.10).
1 H. E. Jeong, P. Kim, M. K. Kwak, C. H. Seo and K. Y. Suh, "Capillarity kinetics of water in homogeneous, hydrophilic polymeric micro- to nanochannel," Small 3, 778 (2007.03).